503 Service Unavailable, Access to cyberpanel home page
Bellow show message upgade
This server has installed CyberPanel.
Visit https://www.cyberpanel.net
Forum https://forums.cyberpanel.net
Log in https://172.96.190.208:8090
Current Server time : 2019-10-30 17:02:25.
Current Load average: 0.14, 0.12, 0.19
Current CPU usage : 1.50878%.
Current RAM usage : 534/985MB (54.21%).
Current Disk usage : 11/20GB (54%).
System uptime : 0 days, 21 hours, 14 minutes.
Enjoy your accelerated Internet by CyberPanel.
[root@ngacareer ~]#
[root@ngacareer ~]# wget https://cyberpanel.net/upgrade-ent.py
–2019-10-30 17:02:29-- https://cyberpanel.net/upgrade-ent.py
Resolving cyberpanel.net (cyberpanel.net)… 104.27.162.149, 104.27.163.149, 260 6:4700:30::681b:a395, …
Connecting to cyberpanel.net (cyberpanel.net)|104.27.162.149|:443… connected.
HTTP request sent, awaiting response… 301 Moved Permanently
Location: https://cyberpanel.sh/upgrade-ent.py [following]
–2019-10-30 17:02:30-- https://cyberpanel.sh/upgrade-ent.py
Resolving cyberpanel.sh (cyberpanel.sh)… 89.208.248.38
Connecting to cyberpanel.sh (cyberpanel.sh)|89.208.248.38|:443… connected.
HTTP request sent, awaiting response… 200 OK
Length: 25916 (25K) [application/octet-stream]
Saving to: ‘upgrade-ent.py’
100%[======================================>] 25,916 153KB/s in 0.2s
2019-10-30 17:02:31 (153 KB/s) - ‘upgrade-ent.py’ saved [25916/25916]
[root@ngacareer ~]# python upgrade-ent.py
Failed to stop gunicorn.socket: Unit gunicorn.socket not loaded.
Requirement already satisfied (use --upgrade to upgrade): pydns in /usr/lib/pyth on2.7/site-packages
You are using pip version 8.1.2, however version 19.3.1 is available.
You should consider upgrading via the ‘pip install --upgrade pip’ command.
–2019-10-30 10:02:46-- https://cyberpanel.net/CyberPanelPremium.1.9.1.tar.gz
Resolving cyberpanel.net (cyberpanel.net)… 104.27.162.149, 104.27.163.149, 260 6:4700:30::681b:a295, …
Connecting to cyberpanel.net (cyberpanel.net)|104.27.162.149|:443… connected.
HTTP request sent, awaiting response… 301 Moved Permanently
Location: https://cyberpanel.sh/CyberPanelPremium.1.9.1.tar.gz [following]
–2019-10-30 10:02:47-- https://cyberpanel.sh/CyberPanelPremium.1.9.1.tar.gz
Resolving cyberpanel.sh (cyberpanel.sh)… 89.208.248.38
Connecting to cyberpanel.sh (cyberpanel.sh)|89.208.248.38|:443… connected.
HTTP request sent, awaiting response… 404 Not Found
2019-10-30 10:02:47 ERROR 404: Not Found.
[10-02-47-Wed-Oct-2019] ######################################################## #################
[10-02-47-Wed-Oct-2019] Latest version successfully downloaded!
[10-02-47-Wed-Oct-2019] ######################################################## #################
[10-02-47-Wed-Oct-2019] ######################################################## #################
[10-02-47-Wed-Oct-2019] Backing up settings file.
[10-02-47-Wed-Oct-2019] ######################################################## #################
[10-02-47-Wed-Oct-2019] ######################################################## #################
[10-02-47-Wed-Oct-2019] Settings file backed up.
[10-02-47-Wed-Oct-2019] ######################################################## #################
tar (child): CyberPanelPremium.1.9.1.tar.gz: Cannot open: No such file or direct ory
tar (child): Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error is not recoverable: exiting now
[10-02-53-Wed-Oct-2019] ######################################################## #################
[10-02-53-Wed-Oct-2019] New version successfully extracted!
[10-02-53-Wed-Oct-2019] ######################################################## #################
[10-02-53-Wed-Oct-2019] ######################################################## #################
[10-02-53-Wed-Oct-2019] Restoring settings file!
[10-02-53-Wed-Oct-2019] ######################################################## #################
Requirement already satisfied (use --upgrade to upgrade): tldextract in /usr/lib /python2.7/site-packages
Requirement already satisfied (use --upgrade to upgrade): idna in /usr/lib/pytho n2.7/site-packages (from tldextract)
Requirement already satisfied (use --upgrade to upgrade): setuptools in /usr/lib /python2.7/site-packages (from tldextract)
Requirement already satisfied (use --upgrade to upgrade): requests-file>=1.4 in /usr/lib/python2.7/site-packages (from tldextract)
Requirement already satisfied (use --upgrade to upgrade): requests>=2.1.0 in /us r/lib/python2.7/site-packages (from tldextract)
Requirement already satisfied (use --upgrade to upgrade): six in /usr/lib/python 2.7/site-packages (from requests-file>=1.4->tldextract)
Requirement already satisfied (use --upgrade to upgrade): chardet<3.1.0,>=3.0.2 in /usr/lib/python2.7/site-packages (from requests>=2.1.0->tldextract)
Requirement already satisfied (use --upgrade to upgrade): urllib3<1.23,>=1.21.1 in /usr/lib/python2.7/site-packages (from requests>=2.1.0->tldextract)
Requirement already satisfied (use --upgrade to upgrade): certifi>=2017.4.17 in /usr/lib/python2.7/site-packages (from requests>=2.1.0->tldextract)
You are using pip version 8.1.2, however version 19.3.1 is available.
You should consider upgrading via the ‘pip install --upgrade pip’ command.
[10-02-53-Wed-Oct-2019] ######################################################## #################
[10-02-53-Wed-Oct-2019] tldextract successfully installed! [pip]
[10-02-53-Wed-Oct-2019] ######################################################## #################
[10-02-53-Wed-Oct-2019] ######################################################## #################
[10-02-53-Wed-Oct-2019] tldextract successfully installed! [pip]
[10-02-53-Wed-Oct-2019] ######################################################## #################
[10-02-53-Wed-Oct-2019] ######################################################## #################
[10-02-53-Wed-Oct-2019] Setting up virtual enviroment for CyberPanel.
[10-02-53-Wed-Oct-2019] ######################################################## #################
Loaded plugins: fastestmirror
Repository nodesource is listed more than once in the configuration
Repository nodesource-source is listed more than once in the configuration
Loading mirror speeds from cached hostfile
- base: mirror.layeronline.com
- centosplus: centos.mirror.globo.tech
- epel: d2lzkl7pfhq30w.cloudfront.net
- extras: muug.ca
- updates: muug.ca
Package libattr-devel-2.4.46-13.el7.x86_64 already installed and latest version
Package xz-devel-5.2.2-1.el7.x86_64 already installed and latest version
Package gpgme-devel-1.3.2-5.el7.x86_64 already installed and latest version
Package 1:mariadb-devel-5.5.64-1.el7.x86_64 is obsoleted by MariaDB-devel-10.1.4 1-1.el7.centos.x86_64 which is already installed
Package libcurl-devel-7.29.0-54.el7.x86_64 already installed and latest version
Nothing to do
[10-02-56-Wed-Oct-2019] ######################################################## #################
[10-02-56-Wed-Oct-2019] Project dependant modules installed successfully!!
[10-02-56-Wed-Oct-2019] ######################################################## #################
Requirement already satisfied (use --upgrade to upgrade): virtualenv in /usr/lib /python2.7/site-packages
You are using pip version 8.1.2, however version 19.3.1 is available.
You should consider upgrading via the ‘pip install --upgrade pip’ command.
[10-02-57-Wed-Oct-2019] ######################################################## #################
[10-02-57-Wed-Oct-2019] virtualenv installed successfully!
[10-02-57-Wed-Oct-2019] ######################################################## #################
No LICENSE.txt / LICENSE found in source
New python executable in /usr/local/CyberCP/bin/python2
Also creating executable in /usr/local/CyberCP/bin/python
Installing setuptools, pip, wheel…
done.
[10-03-04-Wed-Oct-2019] ######################################################## #################
[10-03-04-Wed-Oct-2019] virtualenv setuped successfully!
[10-03-04-Wed-Oct-2019] ######################################################## #################
No LICENSE.txt / LICENSE found in source
New python executable in /usr/local/CyberCP/bin/python2
Not overwriting existing python script /usr/local/CyberCP/bin/python (you must u se /usr/local/CyberCP/bin/python2)
Installing setuptools, pip, wheel…
done.
DEPRECATION: Python 2.7 will reach the end of its life on January 1st, 2020. Ple ase upgrade your Python as Python 2.7 won’t be maintained after that date. A fut ure version of pip will drop support for Python 2.7. More details about Python 2 support in pip, can be found at https://pip.pypa.io/en/latest/development/relea se-process/#python-2-support
ERROR: Could not open requirements file: [Errno 2] No such file or directory: ‘/ usr/local/CyberCP/requirments.txt’
[10-03-13-Wed-Oct-2019] ######################################################## #################
[10-03-13-Wed-Oct-2019] Trying to install project dependant modules, trying agai n, try number: 1
[10-03-13-Wed-Oct-2019] ######################################################## #################
DEPRECATION: Python 2.7 will reach the end of its life on January 1st, 2020. Ple ase upgrade your Python as Python 2.7 won’t be maintained after that date. A fut ure version of pip will drop support for Python 2.7. More details about Python 2 support in pip, can be found at https://pip.pypa.io/en/latest/development/relea se-process/#python-2-support
ERROR: Could not open requirements file: [Errno 2] No such file or directory: ‘/ usr/local/CyberCP/requirments.txt’
[10-03-14-Wed-Oct-2019] ######################################################## #################
[10-03-14-Wed-Oct-2019] Trying to install project dependant modules, trying agai n, try number: 2
[10-03-14-Wed-Oct-2019] ######################################################## #################
DEPRECATION: Python 2.7 will reach the end of its life on January 1st, 2020. Ple ase upgrade your Python as Python 2.7 won’t be maintained after that date. A fut ure version of pip will drop support for Python 2.7. More details about Python 2 support in pip, can be found at https://pip.pypa.io/en/latest/development/relea se-process/#python-2-support
ERROR: Could not open requirements file: [Errno 2] No such file or directory: ‘/ usr/local/CyberCP/requirments.txt’
[10-03-15-Wed-Oct-2019] ######################################################## #################
[10-03-15-Wed-Oct-2019] Trying to install project dependant modules, trying agai n, try number: 3
[10-03-15-Wed-Oct-2019] ######################################################## #################
[10-03-15-Wed-Oct-2019] ######################################################## #################
[10-03-15-Wed-Oct-2019] Failed to install project dependant modules! [setupVirtu alEnv]
[10-03-15-Wed-Oct-2019] ######################################################## #################
Failed to stop gunicorn.socket: Unit gunicorn.socket not loaded.
No LICENSE.txt / LICENSE found in source
New python executable in /usr/local/CyberCP/bin/python2
Not overwriting existing python script /usr/local/CyberCP/bin/python (you must u se /usr/local/CyberCP/bin/python2)
Installing setuptools, pip, wheel…
done.
[10-03-22-Wed-Oct-2019] ######################################################## #################
[10-03-22-Wed-Oct-2019] Virtual enviroment for CyberPanel successfully installed .
[10-03-22-Wed-Oct-2019] ######################################################## #################
Failed to restart gunicorn.socket: Unit not found.
[10-03-29-Wed-Oct-2019] ######################################################## #################
[10-03-29-Wed-Oct-2019] Upgrade Completed.
[10-03-29-Wed-Oct-2019] ######################################################## #################
[root@ngacareer ~]# cd /usr/local/lscp/cyberpanel
[root@ngacareer cyberpanel]# chown -R lscpd:lscpd rainloop
[root@ngacareer cyberpanel]# systemctl restart lscpd
[root@ngacareer cyberpanel]#