Hi i’m trying to block all incoming IPS rathen than cloudflare but it doesn’t works
ConfigServer Security & Firewall - csf v14.16
Firewall Status: Enabled and Running
Edit csf.allow, the IP address allow file (Currently: 17
permanent IP allows)
Summary
###############################################################################
Copyright 2006-2018, Way to the Web Limited
URL: http://www.configserver.com
Email: [email protected]
###############################################################################
The following IP addresses will be allowed through iptables.
One IP address per line.
CIDR addressing allowed with a quaded IP (e.g. 192.168.254.0/24).
Only list IP addresses, not domain names (they will be ignored)
Advanced port+ip filtering allowed with the following format
tcp/udp|in/out|s/d=port|s/d=ip
See readme.txt for more information
Note: IP addressess listed in this file will NOT be ignored by lfd, so they
can still be blocked. If you do not want lfd to block an IP address you must
add it to csf.ignore
173.245.48.0/20
103.21.244.0/22
103.22.200.0/22
103.31.4.0/22
141.101.64.0/18
108.162.192.0/18
190.93.240.0/20
188.114.96.0/20
197.234.240.0/22
198.41.128.0/17
162.158.0.0/15
104.16.0.0/13
104.24.0.0/14
172.64.0.0/13
131.0.72.0/22
Edit csf.deny, the IP address deny file (Currently: 6
permanent IP bans)
Summary
###############################################################################
Copyright 2006-2018, Way to the Web Limited
URL: http://www.configserver.com
Email: [email protected]
###############################################################################
The following IP addresses will be blocked in iptables
One IP address per line
CIDR addressing allowed with a quaded IP (e.g. 192.168.254.0/24)
Only list IP addresses, not domain names (they will be ignored)
Note: If you add the text “do not delete” to the comments of an entry then
DENY_IP_LIMIT will ignore those entries and not remove them
Advanced port+ip filtering allowed with the following format
tcp/udp|in/out|s/d=port,port,…|s/d=ip
See readme.txt for more information regarding advanced port filtering
0.0.0.0/0
What i’m doing wrong?